EN
EN
| Tank Type: | 20’ ISO full frame collar tank, Type UN Portable Tank T11, insulated, steam heated, top side rails fitted | ||||
| Frame Dimensions: | 20’ x 8’ x 8’6” | ||||
| Capacity: | 21,000 Litres (+ /- 1%) | 24,000 Litres (+ /- 1%) | 25,000 Litres (+ /- 1%) | 26,000 Litres (+0 /- 1%) | |
| M.G.W.: | 36,000 kg | ||||
| Tare (est.): | 3,550 kg +/- 3% | 3,650 kg +/- 3% | 3,750 kg +/- 3% | 3,800 kg +/- 3% | |
| Max Payload: | 32,450 kg | 32,350 kg | 32,250 kg | 32,200 kg | |
| Design Pressure: | 4 Bar | ||||
| Test Pressure: | 6 Bar | ||||
| Max. Allowable Vacuum: | 0.41 Bar | ||||
| Design Temp: | -40℃ to +130℃ | ||||
| Vessel Material: | SANS 50028-7 WNr 1.4402/14404 (C<0.03%), equivalent to 316L | ||||
| Shell: Cold Rolled 2B finish | |||||
| Ends: Hot rolled or Cold Rolled, polished internally to 1.2 Micron CLA | |||||
| Shell Thickness: | 4.4 nominal | ||||
| Ends Thickness (A.F): | 4.5 mm nominal | 4.6 mm nominal | |||
| Corrosion allowance: | 0.2mm | ||||
| Frame Material: | GB/T 1591-Q345D or SPA-H (or equivalent) | ||||
| Frame to Shell: | 304 stainless steel | ||||
| Corner castings: | ISO 1161 - 8 off | ||||
| Vessel Design Code: | ASME VIII Div.1 where applicable. | ||||
| Radiography: | Shell: | ASME Spot | |||
| Ends: | ASME Full | ||||
| Inspection Agency: | LR or BV | ||||
| Cargo carried: | See dangerous cargo lists for UN Portable T11 tank | ||||
| Stacking: | Each container approved for 10 high stacking | ||||
| Design Approvals: | IMDG T11, CFR 49, ADR/RID, CSC, TC, TIR, ISO, UIC, US DOT | ||||
